Ordering Information

Mesh can be purchased in rolls, lengths cut to size, or manufactured into screencloths and other fabricated products such as mesh baskets and filter discs. Roll lengths are normally 30 metres long in standard widths of 1220mm; some specifications are also available in 1000 and 1550mm wide.

Screen cloth dimensions need to be provided when ordering. If the dimensions are not known please refer to the information on how to determine the correct dimensions, which can be found further down. If you are still unsure, one of our Technical Representatives will be available to assist.

Stainless Steel Mesh Specifications

Imperial Mesh	Aperture (mm)	Wire Dia (mm)	Weave Style	Grade	Open Area (%)
1	22.40	3.15	Crimped	316	77
3/4	16.00	2.50	"	"	75
2	11.20	1.60	Plain	304	77
2	10.60	2.00	"	"	70
2	10.00	2.50		316	63
3	7.00	1.60		304	37
3	6.30	2.00	"	"	57
4	5.30	1.00	"	"	71
4	4.70	1.60	"	"	55
5	3.90	1.20	"	"	58
5	3.50	1.60	"	"	46
6	3.30	0.91	"	"	61
6	3.00	1.20	"	"	51
6	2.70	1.60	"	"	38
8	2.50	0.70	"	"	60
8	2.30	0.91	"	"	51
10	2.10	0.45	"	"	67
8	2.00	1.20	"	"	30
10	1.90	0.61	"	"	58
10	1.60	0.91	"	"	41
12	1.60	0.50	"	"	58
12	1.40	0.71	"	"	44
14	1.30	0.50	"	"	52
14	1.25	0.56	"	"	48
12	1.20	0.90	"	"	32
16	1.20	0.37	"	"	58
16	1.12	0.45	"	"	51
16	1.00	0.56	"	"	42
20	0.900	0.37	"	"	50
20	0.800	0.45	"	"	41
24	0.745	0.31	"	"	49
20	0.740	0.56	"	"	31
24	0.600	0.45	"	"	33
30	0.570	0.27	"	"	46
30	0.530	0.31	"	"	39
40	0.415	0.22	"	"	40
50	0.310	0.20	"	"	38
60	0.260	0.16	"	"	35
70	0.210	0.15	"	"	34
80	0.190	0.13	"	"	34
100	0.150	0.10	"	"	36
120	0.130	0.08			37
140	0.110	0.071	"	"	37
150	0.100	0.063	"	"	37
180	0.090	0.050	"	"	42
200	0.075	0.052	"	"	36
250	0.063	0.040	Twill	316	38
300	0.053	0.036	"	"	35
325	0.045	0.036	"	"	31
350	0.040	0.032	"	"	31
400	0.034	0.030	"	"	28
500	0.025	0.025	"	"	25
	24/110	0.35/0.25	Dutch	"

Other specifications available from mild steel, high tensile steel, galvanised and brass.

Cross-Tensions Screencloth Ordering Information

Please supply the following information when ordering screencloths. If information is difficult to obtain our Technical Representatives are available to assist.

1. Quantity - State number of screencloths required
2. Mesh size and type - State the aperture size, wire diameter and material.
3. Length - The length of a screencloth should be the same length as the side clamp bards. State if an overlap is required. A 25mm overlap can be provided on screens where there is more than one screencloth on a deck. This overlap covers the join between screencloths on the screen deck. The overlap of one screencloth overlaying the next screencloth down the flow of the deck. This ensures oversize product will not pass through the join between screencloths.
4. Width - For Cross-Tension Screencloths. The width is determined by the screening plants width dimension, this is the measurement between the side plates across the screen deck on the inside, less a minimum 20mm clearance each side (see sketch below).