Wedge Wire
Sieve Bends
Wedge Wire is an ideas screening media for sieves and static dewatering screens.
The Wedge Wire profile positioned perpendicular to the flow provides excellent separation.
It is important to note that to maintain effective separation the screen surface should be rotated 180 degrees at pre-determined intervals to position the sharp high leading edge of the profile to slurry the flow.
Rotation frequency is dependent on the abrasiveness of the feed slurry and can vary from just a few hours to several days. We will be pleased to assist in ensuring you obtain the maximum performance from your Inter-Screen Wedge Wire.
Ordering Information
The diagrams to the right show the relevant dimensions required of the screen panel, including the aperture size surface. Aperture size is dependent not only on the cut size required, but also by the angle of the cut surface. As an example a screen slope of 60 degrees, will result in an effective opening of approximately half the aperture size.
We will be pleased to assist you in obtaining the correct order information.
